88 lines
3.3 KiB
OpenSCAD
88 lines
3.3 KiB
OpenSCAD
include <settings.scad>;
|
|
|
|
|
|
module rod(length, threaded) if (threaded && renderrodthreads) {
|
|
linear_extrude(height = length, center = true, convexity = 10, twist = -360 * length / rodpitch, $fn = fn)
|
|
translate([rodsize * 0.1 / 2, 0, 0])
|
|
circle(r = rodsize * 0.9 / 2, $fn = fn);
|
|
} else cylinder(h = length, r = rodsize / 2, center = true, $fn = fn);
|
|
|
|
|
|
module screw(length, nutpos, washer, bearingpos = -1) union(){
|
|
translate([0, 0, -length / 2]) if (renderscrewthreads) {
|
|
linear_extrude(height = length, center = true, convexity = 10, twist = -360 * length / screwpitch, $fn = fn)
|
|
translate([screwsize * 0.1 / 2, 0, 0])
|
|
circle(r = screwsize * 0.9 / 2, $fn = fn);
|
|
} else cylinder(h = length, r = screwsize / 2, center = true, $fn = fn);
|
|
render() difference() {
|
|
translate([0, 0, screwsize / 2]) cylinder(h = screwsize, r = screwsize, center = true, $fn = fn);
|
|
translate([0, 0, screwsize]) cylinder(h = screwsize, r = screwsize / 2, center = true, $fn = 6);
|
|
}
|
|
if (washer > 0 && nutpos > 0) {
|
|
washer(nutpos);
|
|
nut(nutpos + washersize);
|
|
} else if (nutpos > 0) nut(nutpos);
|
|
if (bearingpos >= 0) bearing(bearingpos);
|
|
}
|
|
|
|
|
|
module bearing(position) render() translate([0, 0, -position - bearingwidth / 2]) union() {
|
|
difference() {
|
|
cylinder(h = bearingwidth, r = bearingsize / 2, center = true, $fn = fn);
|
|
cylinder(h = bearingwidth * 2, r = bearingsize / 2 - 1, center = true, $fn = fn);
|
|
}
|
|
difference() {
|
|
cylinder(h = bearingwidth - 0.5, r = bearingsize / 2 - 0.5, center = true, $fn = fn);
|
|
cylinder(h = bearingwidth * 2, r = screwsize / 2 + 0.5, center = true, $fn = fn);
|
|
}
|
|
difference() {
|
|
cylinder(h = bearingwidth, r = screwsize / 2 + 1, center = true, $fn = fn);
|
|
cylinder(h = bearingwidth + 0.1, r = screwsize / 2, center = true, $fn = fn);
|
|
}
|
|
}
|
|
|
|
|
|
module nut(position, washer) render() translate([0, 0, -position - nutsize / 2]) {
|
|
intersection() {
|
|
scale([1, 1, 0.5]) sphere(r = 1.05 * screwsize, center = true);
|
|
difference() {
|
|
cylinder (h = nutsize, r = nutdiameter / 2, center = true, $fn = 6);
|
|
cylinder(r = screwsize / 2, h = nutsize + 0.1, center = true, $fn = fn);
|
|
}
|
|
}
|
|
if (washer > 0) washer(0);
|
|
}
|
|
|
|
|
|
module washer(position) render() translate ([0, 0, -position - washersize / 2]) difference() {
|
|
cylinder(r = washerdiameter / 2, h = washersize, center = true, $fn = fn);
|
|
cylinder(r = screwsize / 2, h = washersize + 0.1, center = true, $fn = fn);
|
|
}
|
|
|
|
module rodnut(position, washer) render() translate([0, 0, position]) {
|
|
intersection() {
|
|
scale([1, 1, 0.5]) sphere(r = 1.05 * rodsize, center = true);
|
|
difference() {
|
|
cylinder (h = rodnutsize, r = rodnutdiameter / 2, center = true, $fn = 6);
|
|
rod(rodnutsize + 0.1);
|
|
}
|
|
}
|
|
if (washer == 1 || washer == 4) rodwasher(((position > 0) ? -1 : 1) * (rodnutsize + rodwashersize) / 2);
|
|
if (washer == 2 || washer == 4) rodwasher(((position > 0) ? 1 : -1) * (rodnutsize + rodwashersize) / 2);
|
|
}
|
|
|
|
|
|
module rodwasher(position) render() translate ([0, 0, position]) difference() {
|
|
cylinder(r = rodwasherdiameter / 2, h = rodwashersize, center = true, $fn = fn);
|
|
rod(rodwashersize + 0.1);
|
|
}
|
|
|
|
|
|
rod(20);
|
|
translate([rodsize * 2.5, 0, 0]) rod(20, true);
|
|
translate([rodsize * 5, 0, 0]) screw(10, true);
|
|
translate([rodsize * 7.5, 0, 0]) bearing();
|
|
translate([rodsize * 10, 0, 0]) rodnut();
|
|
translate([rodsize * 12.5, 0, 0]) rodwasher();
|
|
translate([rodsize * 15, 0, 0]) nut();
|
|
translate([rodsize * 17.5, 0, 0]) washer(); |