dotfiles/kitty/kitty.conf

# vim:fileencoding=utf-8:foldmethod=marker

#: Fonts

#: kitty has very powerful font management. You can configure
#: individual font faces and even specify special fonts for particular
#: characters.

font_family      Fira Code
bold_font        auto
italic_font      auto
bold_italic_font auto

#: You can specify different fonts for the bold/italic/bold-italic
#: variants. To get a full list of supported fonts use the `kitty
#: +list-fonts` command. By default they are derived automatically, by
#: the OSes font system. When bold_font or bold_italic_font is set to
#: auto on macOS, the priority of bold fonts is semi-bold, bold,
#: heavy. Setting them manually is useful for font families that have
#: many weight variants like Book, Medium, Thick, etc. For example::

#:     font_family      Operator Mono Book
#:     bold_font        Operator Mono Medium
#:     italic_font      Operator Mono Book Italic
#:     bold_italic_font Operator Mono Medium Italic

font_size 11.0

#: Font size (in pts)

force_ltr no

#: kitty does not support BIDI (bidirectional text), however, for RTL
#: scripts, words are automatically displayed in RTL. That is to say,
#: in an RTL script, the words "HELLO WORLD" display in kitty as
#: "WORLD HELLO", and if you try to select a substring of an RTL-
#: shaped string, you will get the character that would be there had
#: the the string been LTR. For example, assuming the Hebrew word
#: ירושלים, selecting the character that on the screen appears to be ם
#: actually writes into the selection buffer the character י.  kitty's
#: default behavior is useful in conjunction with a filter to reverse
#: the word order, however, if you wish to manipulate RTL glyphs, it
#: can be very challenging to work with, so this option is provided to
#: turn it off. Furthermore, this option can be used with the command
#: line program GNU FriBidi
#: <https://github.com/fribidi/fribidi#executable> to get BIDI
#: support, because it will force kitty to always treat the text as
#: LTR, which FriBidi expects for terminals.

adjust_line_height  0
adjust_column_width 0

#: Change the size of each character cell kitty renders. You can use
#: either numbers, which are interpreted as pixels or percentages
#: (number followed by %), which are interpreted as percentages of the
#: unmodified values. You can use negative pixels or percentages less
#: than 100% to reduce sizes (but this might cause rendering
#: artifacts).

adjust_baseline 0

#: Adjust the vertical alignment of text (the height in the cell at
#: which text is positioned). You can use either numbers, which are
#: interpreted as pixels or a percentages (number followed by %),
#: which are interpreted as the percentage of the line height. A
#: positive value moves the baseline up, and a negative value moves
#: them down. The underline and strikethrough positions are adjusted
#: accordingly.

symbol_map

#: E.g. symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols

#: Map the specified unicode codepoints to a particular font. Useful
#: if you need special rendering for some symbols, such as for
#: Powerline. Avoids the need for patched fonts. Each unicode code
#: point is specified in the form U+<code point in hexadecimal>. You
#: can specify multiple code points, separated by commas and ranges
#: separated by hyphens. symbol_map itself can be specified multiple
#: times. Syntax is::

#:     symbol_map codepoints Font Family Name

narrow_symbols

#: E.g. narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1

#: Usually, for Private Use Unicode characters and some symbol/dingbat
#: characters, if the character is followed by one or more spaces,
#: kitty will use those extra cells to render the character larger, if
#: the character in the font has a wide aspect ratio. Using this
#: setting you can force kitty to restrict the specified code points
#: to render in the specified number of cells (defaulting to one
#: cell). Syntax is::

#:     narrow_symbols codepoints Optionally the number of cells

disable_ligatures never

#: Choose how you want to handle multi-character ligatures. The
#: default is to always render them.  You can tell kitty to not render
#: them when the cursor is over them by using cursor to make editing
#: easier, or have kitty never render them at all by using always, if
#: you don't like them. The ligature strategy can be set per-window
#: either using the kitty remote control facility or by defining
#: shortcuts for it in kitty.conf, for example::

#:     map alt+1 disable_ligatures_in active always
#:     map alt+2 disable_ligatures_in all never
#:     map alt+3 disable_ligatures_in tab cursor

#: Note that this refers to programming ligatures, typically
#: implemented using the calt OpenType feature. For disabling general
#: ligatures, use the font_features setting.

font_features

#: E.g. font_features none

#: Choose exactly which OpenType features to enable or disable. This
#: is useful as some fonts might have features worthwhile in a
#: terminal. For example, Fira Code Retina includes a discretionary
#: feature, zero, which in that font changes the appearance of the
#: zero (0), to make it more easily distinguishable from Ø. Fira Code
#: Retina also includes other discretionary features known as
#: Stylistic Sets which have the tags ss01 through ss20.

#: For the exact syntax to use for individual features, see the
#: Harfbuzz documentation <https://harfbuzz.github.io/harfbuzz-hb-
#: common.html#hb-feature-from-string>.

#: Note that this code is indexed by PostScript name, and not the font
#: family. This allows you to define very precise feature settings;
#: e.g. you can disable a feature in the italic font but not in the
#: regular font.

#: On Linux, these are read from the FontConfig database first and
#: then this, setting is applied, so they can be configured in a
#: single, central place.

#: To get the PostScript name for a font, use kitty +list-fonts
#: --psnames:

#: .. code-block:: sh

#:     $ kitty +list-fonts --psnames | grep Fira
#:     Fira Code
#:     Fira Code Bold (FiraCode-Bold)
#:     Fira Code Light (FiraCode-Light)
#:     Fira Code Medium (FiraCode-Medium)
#:     Fira Code Regular (FiraCode-Regular)
#:     Fira Code Retina (FiraCode-Retina)

#: The part in brackets is the PostScript name.

#: Enable alternate zero and oldstyle numerals::

#:     font_features FiraCode-Retina +zero +onum

#: Enable only alternate zero::

#:     font_features FiraCode-Retina +zero

#: Disable the normal ligatures, but keep the calt feature which (in
#: this font) breaks up monotony::

#:     font_features TT2020StyleB-Regular -liga +calt

#: In conjunction with force_ltr, you may want to disable Arabic
#: shaping entirely, and only look at their isolated forms if they
#: show up in a document. You can do this with e.g.::

#:     font_features UnifontMedium +isol -medi -fina -init

box_drawing_scale 0.001, 1, 1.5, 2

#: Change the sizes of the lines used for the box drawing unicode
#: characters These values are in pts. They will be scaled by the
#: monitor DPI to arrive at a pixel value. There must be four values
#: corresponding to thin, normal, thick, and very thick lines.

#: 

#: Cursor customization 

cursor #cccccc

#: Default cursor color. If set to the special value none the cursor
#: will be rendered with a "reverse video" effect. It's color will be
#: the color of the text in the cell it is over and the text will be
#: rendered with the background color of the cell.  Note that if the
#: program running in the terminal sets a cursor color, this takes
#: precedence. Also, the cursor colors are modified if the cell
#: background and foreground colors have very low contrast.

cursor_text_color #111111

#: Choose the color of text under the cursor. If you want it rendered
#: with the background color of the cell underneath instead, use the
#: special keyword: background. Note that if cursor is set to none
#: then this setting is ignored.

cursor_shape block

#: The cursor shape can be one of (block, beam, underline). Note that
#: when reloading the config this will be changed only if the cursor
#: shape has not been set by the program running in the terminal. This
#: sets the default cursor shape. Applications running in the terminal
#: can override it. In particular,
#: https://sw.kovidgoyal.net/kitty/shell-integration/ in kitty sets
#: the cursor shape to beam at shell prompts. You can avoid this by
#: setting shell_integration to no-cursor.

cursor_beam_thickness 1.5

#: Defines the thickness of the beam cursor (in pts)

cursor_underline_thickness 2.0

#: Defines the thickness of the underline cursor (in pts)

cursor_blink_interval -1

#: The interval (in seconds) at which to blink the cursor. Set to zero
#: to disable blinking. Negative values mean use system default. Note
#: that numbers smaller than repaint_delay will be limited to
#: repaint_delay.

cursor_stop_blinking_after 15.0

#: Stop blinking cursor after the specified number of seconds of
#: keyboard inactivity.  Set to zero to never stop blinking.

#: 

#: Scrollback 

scrollback_lines 2000

#: Number of lines of history to keep in memory for scrolling back.
#: Memory is allocated on demand. Negative numbers are (effectively)
#: infinite scrollback. Note that using very large scrollback is not
#: recommended as it can slow down performance of the terminal and
#: also use large amounts of RAM. Instead, consider using
#: scrollback_pager_history_size. Note that on config reload if this
#: is changed it will only affect newly created windows, not existing
#: ones.

scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER

#: Program with which to view scrollback in a new window. The
#: scrollback buffer is passed as STDIN to this program. If you change
#: it, make sure the program you use can handle ANSI escape sequences
#: for colors and text formatting. INPUT_LINE_NUMBER in the command
#: line above will be replaced by an integer representing which line
#: should be at the top of the screen. Similarly CURSOR_LINE and
#: CURSOR_COLUMN will be replaced by the current cursor position or
#: set to 0 if there is no cursor, for example, when showing the last
#: command output.

scrollback_pager_history_size 0

#: Separate scrollback history size, used only for browsing the
#: scrollback buffer (in MB). This separate buffer is not available
#: for interactive scrolling but will be piped to the pager program
#: when viewing scrollback buffer in a separate window. The current
#: implementation stores the data in UTF-8, so approximatively 10000
#: lines per megabyte at 100 chars per line, for pure ASCII,
#: unformatted text. A value of zero or less disables this feature.
#: The maximum allowed size is 4GB. Note that on config reload if this
#: is changed it will only affect newly created windows, not existing
#: ones.

scrollback_fill_enlarged_window no

#: Fill new space with lines from the scrollback buffer after
#: enlarging a window.

wheel_scroll_multiplier 5.0

#: Modify the amount scrolled by the mouse wheel. Note this is only
#: used for low precision scrolling devices, not for high precision
#: scrolling on platforms such as macOS and Wayland. Use negative
#: numbers to change scroll direction. See also
#: wheel_scroll_min_lines.

wheel_scroll_min_lines 1

#: The minimum number of lines scrolled by the mouse wheel. The scroll
#: multiplier <wheel_scroll_multiplier> only takes effect after it
#: reaches this number. Note that this is only used for low precision
#: scrolling devices like wheel mice that scroll by very small amounts
#: when using the wheel. With a negative number, the minimum number of
#: lines will always be added.

touch_scroll_multiplier 1.0

#: Modify the amount scrolled by a touchpad. Note this is only used
#: for high precision scrolling devices on platforms such as macOS and
#: Wayland. Use negative numbers to change scroll direction.

#: 

#: Mouse 

mouse_hide_wait 3.0

#: Hide mouse cursor after the specified number of seconds of the
#: mouse not being used. Set to zero to disable mouse cursor hiding.
#: Set to a negative value to hide the mouse cursor immediately when
#: typing text. Disabled by default on macOS as getting it to work
#: robustly with the ever-changing sea of bugs that is Cocoa is too
#: much effort.

url_color #0087bd
url_style curly

#: The color and style for highlighting URLs on mouse-over. url_style
#: can be one of: none, straight, double, curly, dotted, dashed

open_url_with default

#: The program with which to open URLs that are clicked on. The
#: special value default means to use the operating system's default
#: URL handler (open on macOS and xdg-open on Linux).

url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh

#: The set of URL prefixes to look for when detecting a URL under the
#: mouse cursor.

detect_urls yes

#: Detect URLs under the mouse. Detected URLs are highlighted with an
#: underline and the mouse cursor becomes a hand over them. Even if
#: this option is disabled, URLs are still clickable.

url_excluded_characters

#: Additional characters to be disallowed from URLs, when detecting
#: URLs under the mouse cursor. By default, all characters legal in
#: URLs are allowed.

copy_on_select yes

#: Copy to clipboard or a private buffer on select. With this set to
#: clipboard, simply selecting text with the mouse will cause the text
#: to be copied to clipboard. Useful on platforms such as macOS that
#: do not have the concept of primary selections. You can instead
#: specify a name such as a1 to copy to a private kitty buffer
#: instead. Map a shortcut with the paste_from_buffer action to paste
#: from this private buffer. For example::

#: map shift+cmd+v paste_from_buffer a1

#: Note that copying to the clipboard is a security risk, as all
#: programs, including websites open in your browser can read the
#: contents of the system clipboard.

strip_trailing_spaces smart

#: Remove spaces at the end of lines when copying to clipboard. A
#: value of smart will do it when using normal selections, but not
#: rectangle selections. always will always do it.

select_by_word_characters @-./_~?&=%+#

#: Characters considered part of a word when double clicking. In
#: addition to these characters any character that is marked as an
#: alphanumeric character in the unicode database will be matched.

click_interval -1.0

#: The interval between successive clicks to detect double/triple
#: clicks (in seconds). Negative numbers will use the system default
#: instead, if available, or fallback to 0.5.

focus_follows_mouse no

#: Set the active window to the window under the mouse when moving the
#: mouse around

pointer_shape_when_grabbed arrow

#: The shape of the mouse pointer when the program running in the
#: terminal grabs the mouse. Valid values are: arrow, beam and hand

default_pointer_shape beam

#: The default shape of the mouse pointer. Valid values are: arrow,
#: beam and hand

pointer_shape_when_dragging beam

#: The default shape of the mouse pointer when dragging across text.
#: Valid values are: arrow, beam and hand

#: Mouse actions 

#: Mouse buttons can be remapped to perform arbitrary actions. The
#: syntax for doing so is:

#: .. code-block:: none

#:     mouse_map button-name event-type modes action

#: Where ``button-name`` is one of ``left``, ``middle``, ``right`` or
#: ``b1 ... b8`` with added keyboard modifiers, for example:
#: ``ctrl+shift+left`` refers to holding the ctrl+shift keys while
#: clicking with the left mouse button. The number ``b1 ... b8`` can
#: be used to refer to upto eight buttons on a mouse.

#: ``event-type`` is one ``press``, ``release``, ``doublepress``,
#: ``triplepress``, ``click`` and ``doubleclick``.  ``modes``
#: indicates whether the action is performed when the mouse is grabbed
#: by the program running in the terminal, or not. It can have one or
#: more or the values, ``grabbed,ungrabbed``. ``grabbed`` refers to
#: when the program running in the terminal has requested mouse
#: events. Note that the click and double click events have a delay of
#: click_interval to disambiguate from double and triple presses.

#: You can run kitty with the kitty --debug-input command line option
#: to see mouse events. See the builtin actions below to get a sense
#: of what is possible.

#: If you want to unmap an action map it to ``no-op``. For example, to
#: disable opening of URLs with a plain click::

#:     mouse_map left click ungrabbed no-op

#: .. note::
#:     Once a selection is started, releasing the button that started it will
#:     automatically end it and no release event will be dispatched.

clear_all_mouse_actions no

#: You can have kitty remove all mouse actions seen up to this point.
#: Useful, for instance, to remove the default mouse actions.

#: Click the link under the mouse or move the cursor

mouse_map left click ungrabbed mouse_handle_click selection link prompt

#::  First check for a selection and if one exists do nothing. Then
#::  check for a link under the mouse cursor and if one exists, click
#::  it. Finally check if the click happened at the current shell
#::  prompt and if so, move the cursor to the click location. Note
#::  that this requires shell-integration to work.

#: Click the link under the mouse or move the cursor even when grabbed

mouse_map shift+left click grabbed,ungrabbed mouse_handle_click selection link prompt

#::  Same as above, except that the action is performed even when the
#::  mouse is grabbed by the program running in the terminal.

#: Click the link under the mouse cursor

mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_handle_click link

#::  Variant with ctrl+shift is present because the simple click based
#::  version has an unavoidable delay of click_interval, to
#::  disambiguate clicks from double clicks.

#: Discard press event for link click

mouse_map ctrl+shift+left press grabbed discard_event

#::  Prevent this press event from being sent to the program that has
#::  grabbed the mouse, as the corresponding release event is used to
#::  open a URL.

#: Paste from the primary selection

mouse_map middle release ungrabbed paste_from_selection

#: Start selecting text

mouse_map left press ungrabbed mouse_selection normal

#: Start selecting text in a rectangle

mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle

#: Select a word

mouse_map left doublepress ungrabbed mouse_selection word

#: Select a line

mouse_map left triplepress ungrabbed mouse_selection line

#::  Select the entire line

#: Select line from point

mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point

#::  Select from the clicked point to the end of the line

#: Extend the current selection

mouse_map right press ungrabbed mouse_selection extend

#::  If you want only the end of the selection to be moved instead of
#::  the nearest boundary, use move-end instead of extend.

#: Paste from the primary selection even when grabbed

mouse_map shift+middle release ungrabbed,grabbed paste_selection
mouse_map shift+middle press grabbed discard_event

#: Start selecting text even when grabbed

mouse_map shift+left press ungrabbed,grabbed mouse_selection normal

#: Start selecting text in a rectangle even when grabbed

mouse_map ctrl+shift+alt+left press ungrabbed,grabbed mouse_selection rectangle

#: Select a word even when grabbed

mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word

#: Select a line even when grabbed

mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line

#::  Select the entire line

#: Select line from point even when grabbed

mouse_map ctrl+shift+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point

#::  Select from the clicked point to the end of the line

#: Extend the current selection even when grabbed

mouse_map shift+right press ungrabbed,grabbed mouse_selection extend

#: Show clicked command output in pager

mouse_map ctrl+shift+right press ungrabbed mouse_show_command_output

#::  Requires https://sw.kovidgoyal.net/kitty/shell-integration/ to
#::  work

#: 

#: 

#: Performance tuning 

repaint_delay 6

#: Delay (in milliseconds) between screen updates. Decreasing it,
#: increases frames-per-second (FPS) at the cost of more CPU usage.
#: The default value yields ~100 FPS which is more than sufficient for
#: most uses. Note that to actually achieve 100 FPS you have to either
#: set sync_to_monitor to no or use a monitor with a high refresh
#: rate. Also, to minimize latency when there is pending input to be
#: processed, repaint_delay is ignored.

input_delay 3

#: Delay (in milliseconds) before input from the program running in
#: the terminal is processed. Note that decreasing it will increase
#: responsiveness, but also increase CPU usage and might cause flicker
#: in full screen programs that redraw the entire screen on each loop,
#: because kitty is so fast that partial screen updates will be drawn.

sync_to_monitor yes

#: Sync screen updates to the refresh rate of the monitor. This
#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
#: when scrolling. However, it limits the rendering speed to the
#: refresh rate of your monitor. With a very high speed mouse/high
#: keyboard repeat rate, you may notice some slight input latency. If
#: so, set this to no.

#: 

#: Terminal bell 

enable_audio_bell no

#: Enable/disable the audio bell. Useful in environments that require
#: silence.

visual_bell_duration 0.0

#: Visual bell duration. Flash the screen when a bell occurs for the
#: specified number of seconds. Set to zero to disable.

visual_bell_color none

#: The color used by visual bell. Set to none will fall back to
#: selection background color. If you feel that the visual bell is too
#: bright, you can set it to a darker color.

window_alert_on_bell yes

#: Request window attention on bell. Makes the dock icon bounce on
#: macOS or the taskbar flash on linux.

bell_on_tab "🔔 "

#: Some text or a unicode symbol to show on the tab if a window in the
#: tab that does not have focus has a bell. If you want to use leading
#: or trailing spaces surround the text with quotes. See
#: tab_title_template for how this is rendered.

#: For backwards compatibility, values of yes, y, true are converted
#: to the default bell symbol and no, n, false, none are converted to
#: the empty string.

command_on_bell none

#: Program to run when a bell occurs. The environment variable
#: KITTY_CHILD_CMDLINE can be used to get the program running in the
#: window in which the bell occurred.

bell_path none

#: Path to a sound file to play as the bell sound. If set to none, the
#: system default bell sound is used. Must be in a format supported by
#: the operating systems sound API, such as WAV or OGA on Linux
#: (libcanberra) or AIFF, MP3 or WAV on macOS (NSSound)

#: 

#: Window layout 

remember_window_size  yes
initial_window_width  640
initial_window_height 400

#: If enabled, the window size will be remembered so that new
#: instances of kitty will have the same size as the previous
#: instance. If disabled, the window will initially have size
#: configured by initial_window_width/height, in pixels. You can use a
#: suffix of "c" on the width/height values to have them interpreted
#: as number of cells instead of pixels.

enabled_layouts *

#: The enabled window layouts. A comma separated list of layout names.
#: The special value all means all layouts. The first listed layout
#: will be used as the startup layout. Default configuration is all
#: layouts in alphabetical order. For a list of available layouts, see
#: the https://sw.kovidgoyal.net/kitty/overview/#layouts.

window_resize_step_cells 2
window_resize_step_lines 2

#: The step size (in units of cell width/cell height) to use when
#: resizing kitty windows in a layout with the keyboard
#: (start_resizing_window). The cells value is used for horizontal
#: resizing and the lines value for vertical resizing.

window_border_width 0.5pt

#: The width of window borders. Can be either in pixels (px) or pts
#: (pt). Values in pts will be rounded to the nearest number of pixels
#: based on screen resolution. If not specified the unit is assumed to
#: be pts. Note that borders are displayed only when more than one
#: window is visible. They are meant to separate multiple windows.

draw_minimal_borders yes

#: Draw only the minimum borders needed. This means that only the
#: minimum needed borders for inactive windows are drawn. That is only
#: the borders that separate the inactive window from a neighbor. Note
#: that setting a non-zero window margin overrides this and causes all
#: borders to be drawn.

window_margin_width 0

#: The window margin (in pts) (blank area outside the border). A
#: single value sets all four sides. Two values set the vertical and
#: horizontal sides. Three values set top, horizontal and bottom. Four
#: values set top, right, bottom and left.

single_window_margin_width -1

#: The window margin (in pts) to use when only a single window is
#: visible. Negative values will cause the value of
#: window_margin_width to be used instead. A single value sets all
#: four sides. Two values set the vertical and horizontal sides. Three
#: values set top, horizontal and bottom. Four values set top, right,
#: bottom and left.

window_padding_width 0

#: The window padding (in pts) (blank area between the text and the
#: window border). A single value sets all four sides. Two values set
#: the vertical and horizontal sides. Three values set top, horizontal
#: and bottom. Four values set top, right, bottom and left.

placement_strategy center

#: When the window size is not an exact multiple of the cell size, the
#: cell area of the terminal window will have some extra padding on
#: the sides. You can control how that padding is distributed with
#: this option. Using a value of center means the cell area will be
#: placed centrally. A value of top-left means the padding will be on
#: only the bottom and right edges.

active_border_color #00ff00

#: The color for the border of the active window. Set this to none to
#: not draw borders around the active window.

inactive_border_color #cccccc

#: The color for the border of inactive windows

bell_border_color #ff5a00

#: The color for the border of inactive windows in which a bell has
#: occurred

inactive_text_alpha 1.0

#: Fade the text in inactive windows by the specified amount (a number
#: between zero and one, with zero being fully faded).

hide_window_decorations no

#: Hide the window decorations (title-bar and window borders) with
#: yes. On macOS, titlebar-only can be used to only hide the titlebar.
#: Whether this works and exactly what effect it has depends on the
#: window manager/operating system. Note that the effects of changing
#: this setting when reloading config are undefined.

window_logo_path none

#: Path to a logo image. Must be in PNG format. Relative paths are
#: interpreted relative to the kitty config directory.  The logo is
#: displayed in a corner of every kitty window. The position is
#: controlled by window_logo_position. Individual windows can be
#: configured to have different logos either using the launch function
#: or the remote-control facility.

window_logo_position bottom-right

#: Where to position the window logo in the window. The value can be
#: one of: top-left, top, top-right, left, center, right, bottom-left,
#: bottom, bottom-right.

window_logo_alpha 0.5

#: The amount the logo should be faded into the background. With zero
#: being fully faded and one being fully opaque.

resize_debounce_time 0.1

#: The time (in seconds) to wait before redrawing the screen when a
#: resize event is received. On platforms such as macOS, where the
#: operating system sends events corresponding to the start and end of
#: a resize, this number is ignored.

resize_draw_strategy static

#: Choose how kitty draws a window while a resize is in progress. A
#: value of static means draw the current window contents, mostly
#: unchanged. A value of scale means draw the current window contents
#: scaled. A value of blank means draw a blank window. A value of size
#: means show the window size in cells.

resize_in_steps no

#: Resize the OS window in steps as large as the cells, instead of
#: with the usual pixel accuracy. Combined with an
#: initial_window_width and initial_window_height in number of cells,
#: this option can be used to keep the margins as small as possible
#: when resizing the OS window. Note that this does not currently work
#: on Wayland.

visual_window_select_characters 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZ

#: The list of characters to use for visual window selection (for
#: example for selecting a window to focus with focus_visible_window).
#: The value should be a series of unique numbers or alphabets, case
#: insensitive, from the set [0-9A-Z]. Specify your preference as a
#: string of characters.

confirm_os_window_close 0

#: Ask for confirmation when closing an OS window or a Tab with at
#: least this number of kitty windows in it by window manager (e.g.
#: clicking the window close button or pressing the Operating system
#: shortcut to close windows) or by the close_tab action. A value of
#: zero disables confirmation. This confirmation also applies to
#: requests to quit the entire application (all OS windows, via the
#: quit action). Negative values are converted to positive ones,
#: however, with https://sw.kovidgoyal.net/kitty/shell-integration/
#: enabled, using negative values means windows sitting at a shell
#: prompt are not counted, only windows where some command is
#: currently running. Note that if you want confirmation when closing
#: individual windows, you can map the
#: https://sw.kovidgoyal.net/kitty/actions/#close-window-with-
#: confirmation action.

#: 

#: Tab bar 

tab_bar_edge bottom

#: Which edge to show the tab bar on, top or bottom

tab_bar_margin_width 0.0

#: The margin to the left and right of the tab bar (in pts)

tab_bar_margin_height 0.0 0.0

#: The margin above and below the tab bar (in pts). The first number
#: is the margin between the edge of the OS Window and the tab bar and
#: the second number is the margin between the tab bar and the
#: contents of the current tab.

tab_bar_style fade

#: The tab bar style, can be one of:

#: fade
#:     Each tab's edges fade into the background color (see tab_fade)
#: slant
#:     Tabs look like the tabs in a physical file
#: separator
#:     Tabs are separated by a configurable separator (see tab_separator)
#: powerline
#:     Tabs are shown as a continuous line with "fancy" separators
#:     (see tab_powerline_style)
#: custom
#:     A user-supplied Python function called draw_tab is loaded from the file
#:     tab_bar.py in the kitty config directory. For examples of how to
#:     write such a function, see the functions named draw_tab_with_* in
#:     kitty's source code: kitty/tab_bar.py. See also
#:     this discussion https://github.com/kovidgoyal/kitty/discussions/4447
#:     for examples from kitty users.
#: hidden
#:     The tab bar is hidden. If you use this, you might want to create a
#:     mapping for the https://sw.kovidgoyal.net/kitty/actions/#select-tab
#:     action which presents you with a list of tabs and allows for easy
#:     switching to a tab.

tab_bar_align left

#: The horizontal alignment of the tab bar, can be one of: left,
#: center, or right.

tab_bar_min_tabs 2

#: The minimum number of tabs that must exist before the tab bar is
#: shown

tab_switch_strategy previous

#: The algorithm to use when switching to a tab when the current tab
#: is closed. The default of previous will switch to the last used
#: tab. A value of left will switch to the tab to the left of the
#: closed tab. A value of right will switch to the tab to the right of
#: the closed tab. A value of last will switch to the right-most tab.

tab_fade 0.25 0.5 0.75 1

#: Control how each tab fades into the background when using fade for
#: the tab_bar_style. Each number is an alpha (between zero and one)
#: that controls how much the corresponding cell fades into the
#: background, with zero being no fade and one being full fade. You
#: can change the number of cells used by adding/removing entries to
#: this list.

tab_separator " ┇"

#: The separator between tabs in the tab bar when using separator as
#: the tab_bar_style.

tab_powerline_style angled

#: The powerline separator style between tabs in the tab bar when
#: using powerline as the tab_bar_style, can be one of: angled,
#: slanted, or round.

tab_activity_symbol none

#: Some text or a unicode symbol to show on the tab if a window in the
#: tab that does not have focus has some activity. If you want to use
#: leading or trailing spaces surround the text with quotes. See
#: tab_title_template for how this is rendered.

tab_title_template "{fmt.fg.red}{bell_symbol}{activity_symbol}{fmt.fg.tab}{title}"

#: A template to render the tab title. The default just renders the
#: title with optional symbols for bell and activity. If you wish to
#: include the tab-index as well, use something like: {index}:
#: {title}. Useful if you have shortcuts mapped for goto_tab N. If you
#: prefer to see the index as a superscript, use {sup.index}. In
#: addition you can use {layout_name} for the current layout name,
#: {num_windows} for the number of windows in the tab and
#: {num_window_groups} for the number of window groups (not counting
#: overlay windows) in the tab. Note that formatting is done by
#: Python's string formatting machinery, so you can use, for instance,
#: {layout_name[:2].upper()} to show only the first two letters of the
#: layout name, upper-cased. If you want to style the text, you can
#: use styling directives, for example:
#: {fmt.fg.red}red{fmt.fg.tab}normal{fmt.bg._00FF00}green
#: bg{fmt.bg.tab}. Similarly, for bold and italic:
#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}.
#: Note that for backward compatibility, if {bell_symbol} or
#: {activity_symbol} are not present in the template, they are
#: prepended to it.

active_tab_title_template none

#: Template to use for active tabs, if not specified falls back to
#: tab_title_template.

active_tab_foreground   #000
active_tab_background   #eee
active_tab_font_style   bold-italic
inactive_tab_foreground #444
inactive_tab_background #999
inactive_tab_font_style normal

#: Tab bar colors and styles

tab_bar_background none

#: Background color for the tab bar. Defaults to using the terminal
#: background color.

tab_bar_margin_color none

#: Color for the tab bar margin area. Defaults to using the terminal
#: background color.

#: 

#: Color scheme 

foreground #dddddd
background #000000

#: The foreground and background colors

background_opacity 0.8

#: The opacity of the background. A number between 0 and 1, where 1 is
#: opaque and 0 is fully transparent.  This will only work if
#: supported by the OS (for instance, when using a compositor under
#: X11). Note that it only sets the background color's opacity in
#: cells that have the same background color as the default terminal
#: background. This is so that things like the status bar in vim,
#: powerline prompts, etc. still look good.  But it means that if you
#: use a color theme with a background color in your editor, it will
#: not be rendered as transparent.  Instead you should change the
#: default background color in your kitty config and not use a
#: background color in the editor color scheme. Or use the escape
#: codes to set the terminals default colors in a shell script to
#: launch your editor.  Be aware that using a value less than 1.0 is a
#: (possibly significant) performance hit.  If you want to dynamically
#: change transparency of windows set dynamic_background_opacity to
#: yes (this is off by default as it has a performance cost). Changing
#: this setting when reloading the config will only work if
#: dynamic_background_opacity was enabled in the original config.

background_image none

#: Path to a background image. Must be in PNG format.

background_image_layout tiled

#: Whether to tile, scale or clamp the background image. The value can
#: be one of tiled, mirror-tiled, scaled, clamped.

background_image_linear no

#: When background image is scaled, whether linear interpolation
#: should be used.

dynamic_background_opacity no

#: Allow changing of the background_opacity dynamically, using either
#: keyboard shortcuts (increase_background_opacity and
#: decrease_background_opacity) or the remote control facility.
#: Changing this setting by reloading the config is not supported.

background_tint 0.0

#: How much to tint the background image by the background color. The
#: tint is applied only under the text area, not margin/borders. Makes
#: it easier to read the text. Tinting is done using the current
#: background color for each window. This setting applies only if
#: background_opacity is set and transparent windows are supported or
#: background_image is set.

dim_opacity 0.75

#: How much to dim text that has the DIM/FAINT attribute set. One
#: means no dimming and zero means fully dimmed (i.e. invisible).

selection_foreground #000000
selection_background #fffacd

#: The foreground and background colors for text selected with the
#: mouse. Setting both of these to none will cause a "reverse video"
#: effect for selections, where the selection will be the cell text
#: color and the text will become the cell background color. Setting
#: only selection_foreground to none will cause the foreground color
#: to be used unchanged. Note that these colors can be overridden by
#: the program running in the terminal.

#: The color table 

#: The 256 terminal colors. There are 8 basic colors, each color has a
#: dull and bright version, for the first 16 colors. You can set the
#: remaining 240 colors as color16 to color255.

color0 #000000
color8 #767676

#: black

color1 #cc0403
color9 #f2201f

#: red

color2  #19cb00
color10 #23fd00

#: green

color3  #cecb00
color11 #fffd00

#: yellow

color4  #0d73cc
color12 #1a8fff

#: blue

color5  #cb1ed1
color13 #fd28ff

#: magenta

color6  #0dcdcd
color14 #14ffff

#: cyan

color7  #dddddd
color15 #ffffff

#: white

mark1_foreground black

#: Color for marks of type 1

mark1_background #98d3cb

#: Color for marks of type 1 (light steel blue)

mark2_foreground black

#: Color for marks of type 2

mark2_background #f2dcd3

#: Color for marks of type 1 (beige)

mark3_foreground black

#: Color for marks of type 3

mark3_background #f274bc

#: Color for marks of type 3 (violet)

#: 

#: 

#: Advanced 

shell .

#: The shell program to execute. The default value of . means to use
#: whatever shell is set as the default shell for the current user.
#: Note that on macOS if you change this, you might need to add
#: --login and --interactive to ensure that the shell starts in
#: interactive mode and reads its startup rc files.

editor .

#: The terminal editor (such as ``vim`` or ``nano``) to use when
#: editing the kitty config file or similar tasks.

#: The default value of . means to use the environment variables
#: VISUAL and EDITOR in that order. If these variables aren't set,
#: kitty will run your shell (``$SHELL -l -i -c env``) to see if your
#: shell config files set VISUAL or EDITOR. If that doesn't work,
#: kitty will cycle through various known editors (``vim``, ``emacs``,
#: etc) and take the first one that exists on your system.

close_on_child_death no

#: Close the window when the child process (shell) exits. If no (the
#: default), the terminal will remain open when the child exits as
#: long as there are still processes outputting to the terminal (for
#: example disowned or backgrounded processes). If yes, the window
#: will close as soon as the child process exits. Note that setting it
#: to yes means that any background processes still using the terminal
#: can fail silently because their stdout/stderr/stdin no longer work.

allow_remote_control no

#: Allow other programs to control kitty. If you turn this on other
#: programs can control all aspects of kitty, including sending text
#: to kitty windows, opening new windows, closing windows, reading the
#: content of windows, etc.  Note that this even works over ssh
#: connections. You can chose to either allow any program running
#: within kitty to control it, with yes or only programs that connect
#: to the socket specified with the kitty --listen-on command line
#: option, if you use the value socket-only. The latter is useful if
#: you want to prevent programs running on a remote computer over ssh
#: from controlling kitty. Reloading the config will not affect this
#: setting.

listen_on none

#: Tell kitty to listen to the specified unix/tcp socket for remote
#: control connections. Note that this will apply to all kitty
#: instances. It can be overridden by the kitty --listen-on command
#: line flag. This option accepts only UNIX sockets, such as
#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment
#: variables are expanded. If {kitty_pid} is present then it is
#: replaced by the PID of the kitty process, otherwise the PID of the
#: kitty process is appended to the value, with a hyphen. This option
#: is ignored unless you also set allow_remote_control to enable
#: remote control. See the help for kitty --listen-on for more
#: details. Changing this option by reloading the config is not
#: supported.

env

#: Specify environment variables to set in all child processes. Note
#: that environment variables are expanded recursively, so if you
#: use::

#:     env MYVAR1=a
#:     env MYVAR2=${MYVAR1}/${HOME}/b

#: The value of MYVAR2 will be a/<path to home directory>/b. Using
#: VAR= will set it to the empty string and using just VAR will delete
#: the variable from the child process' environment.

watcher

#: Path to python file which will be loaded for
#: https://sw.kovidgoyal.net/kitty/launch/#watchers. Can be specified
#: more than once to load multiple watchers. The watchers will be
#: added to every kitty window. Relative paths are resolved relative
#: to the kitty config directory. Note that reloading the config will
#: only affect windows created after the reload.

exe_search_path

#: Control where kitty looks to find programs to run. The default
#: search order is: First search the system wide PATH, then
#: ~/.local/bin and ~/bin. If not still not found, the PATH defined in
#: the login shell after sourcing all its startup files is tried.
#: Finally, if present, the PATH in the env option is tried.

#: This option allows you to prepend, append, or remove paths from
#: this search order. It can be specified multiple times for multiple
#: paths. A simple path will be prepended to the search order. A path
#: that starts with the + sign will be append to the search order,
#: after ~/bin above. A path that starts with the - sign will be
#: removed from the entire search order. For example::

#:     exe_search_path /some/prepended/path
#:     exe_search_path +/some/appended/path
#:     exe_search_path -/some/excluded/path

update_check_interval 24

#: Periodically check if an update to kitty is available. If an update
#: is found a system notification is displayed informing you of the
#: available update. The default is to check every 24 hrs, set to zero
#: to disable. Changing this option by reloading the config is not
#: supported.

startup_session none

#: Path to a session file to use for all kitty instances. Can be
#: overridden by using the kitty --session command line option for
#: individual instances. See
#: https://sw.kovidgoyal.net/kitty/overview/#startup-sessions in the
#: kitty documentation for details. Note that relative paths are
#: interpreted with respect to the kitty config directory. Environment
#: variables in the path are expanded. Changing this option by
#: reloading the config is not supported.

clipboard_control write-clipboard write-primary read-clipboard-ask read-primary-ask

#: Allow programs running in kitty to read and write from the
#: clipboard. You can control exactly which actions are allowed. The
#: set of possible actions is: write-clipboard read-clipboard write-
#: primary read-primary read-clipboard-ask read-primary-ask. The
#: default is to allow writing to the clipboard and primary selection
#: and to ask for permission when a program tries to read from the
#: clipboard. Note that disabling the read confirmation is a security
#: risk as it means that any program, even one running on a remote
#: server via SSH can read your clipboard. See also
#: clipboard_max_size.

clipboard_max_size 64

#: The maximum size (in MB) of data from programs running in kitty
#: that will be stored for writing to the system clipboard. See also
#: clipboard_control. A value of zero means no size limit is applied.

file_transfer_confirmation_bypass

#: A password, that can be supplied to the file transfer kitten to
#: skip the transfer confirmation prompt. This should only be used
#: when initiating transfers from trusted computers, over trusted
#: networks or encrypted transports, as it allows programs running on
#: the remote machine to read/write to the local filesystem, without
#: permission.

allow_hyperlinks yes

#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8
#: escape sequences are ignored. Otherwise they become clickable
#: links, that you can click by with the mouse or the hints kitten
#: </kittens/hints>. The special value of ``ask`` means that kitty
#: will ask before opening the link when clicked.

shell_integration enabled

#: Enable shell integration on supported shells. This enables features
#: such as jumping to previous prompts, browsing the output of the
#: previous command in a pager, etc. on supported shells.  Set to
#: ``disabled`` to turn off shell integration, completely. See
#: https://sw.kovidgoyal.net/kitty/shell-integration/ for details.

term xterm-kitty

#: The value of the TERM environment variable to set. Changing this
#: can break many terminal programs, only change it if you know what
#: you are doing, not because you read some advice on Stack Overflow
#: to change it. The TERM variable is used by various programs to get
#: information about the capabilities and behavior of the terminal. If
#: you change it, depending on what programs you run, and how
#: different the terminal you are changing it to is, various things
#: from key-presses, to colors, to various advanced features may not
#: work. Changing this option by reloading the config will only affect
#: newly created windows.

#: 

#: OS specific tweaks 

wayland_titlebar_color system

#: Change the color of the kitty window's titlebar on Wayland systems
#: with client side window decorations such as GNOME. A value of
#: system means to use the default system color, a value of background
#: means to use the background color of the currently active window
#: and finally you can use an arbitrary color, such as #12af59 or red.

macos_titlebar_color system

#: Change the color of the kitty window's titlebar on macOS. A value
#: of system means to use the default system color, light or dark can
#: also be used to set it explicitly. A value of background means to
#: use the background color of the currently active window and finally
#: you can use an arbitrary color, such as #12af59 or red. WARNING:
#: This option works by using a hack, as there is no proper Cocoa API
#: for it. It sets the background color of the entire window and makes
#: the titlebar transparent. As such it is incompatible with
#: background_opacity. If you want to use both, you are probably
#: better off just hiding the titlebar with hide_window_decorations.

macos_option_as_alt no

#: Use the option key as an alt key. With this set to no, kitty will
#: use the macOS native Option+Key = unicode character behavior. This
#: will break any Alt+key keyboard shortcuts in your terminal
#: programs, but you can use the macOS unicode input technique. You
#: can use the values: left, right, or both to use only the left,
#: right or both Option keys as Alt, instead. Changing this setting by
#: reloading the config is not supported.

macos_hide_from_tasks no

#: Hide the kitty window from running tasks (⌘+Tab) on macOS. Changing
#: this setting by reloading the config is not supported.

macos_quit_when_last_window_closed no

#: Have kitty quit when all the top-level windows are closed. By
#: default, kitty will stay running, even with no open windows, as is
#: the expected behavior on macOS.

macos_window_resizable yes

#: Disable this if you want kitty top-level (OS) windows to not be
#: resizable on macOS. Changing this setting by reloading the config
#: will only affect newly created windows.

macos_thicken_font 0

#: Draw an extra border around the font with the given width, to
#: increase legibility at small font sizes. For example, a value of
#: 0.75 will result in rendering that looks similar to sub-pixel
#: antialiasing at common font sizes.

macos_traditional_fullscreen no

#: Use the traditional full-screen transition, that is faster, but
#: less pretty.

macos_show_window_title_in all

#: Show or hide the window title in the macOS window or menu-bar. A
#: value of window will show the title of the currently active window
#: at the top of the macOS window. A value of menubar will show the
#: title of the currently active window in the macOS menu-bar, making
#: use of otherwise wasted space. all will show the title everywhere
#: and none hides the title in the window and the menu-bar. See
#: :opt`macos_menubar_title_max_length` for how to control the length
#: of the title in the menu bar.

macos_menubar_title_max_length 0

#: The maximum number of characters from the window title to show in
#: the global menubar. Values less than one mean there is no maximum.

macos_custom_beam_cursor no

#: Enable/disable custom mouse cursor for macOS that is easier to see
#: on both light and dark backgrounds. WARNING: this might make your
#: mouse cursor invisible on dual GPU machines. Changing this setting
#: by reloading the config is not supported.

linux_display_server auto

#: Choose between Wayland and X11 backends. By default, an appropriate
#: backend based on the system state is chosen automatically. Set it
#: to x11 or wayland to force the choice. Changing this setting by
#: reloading the config is not supported.

#: 

#: Keyboard shortcuts 

#: Keys are identified simply by their lowercase unicode characters.
#: For example: ``a`` for the A key, ``[`` for the left square bracket
#: key, etc. For functional keys, such as ``Enter or Escape`` the
#: names are present at https://sw.kovidgoyal.net/kitty/keyboard-
#: protocol/#functional-key-definitions. For modifier keys, the names
#: are ctrl (control, ⌃), shift (⇧), alt (opt, option, ⌥), super (cmd,
#: command, ⌘). See also: GLFW mods
#: <https://www.glfw.org/docs/latest/group__mods.html>

#: On Linux you can also use XKB key names to bind keys that are not
#: supported by GLFW. See XKB keys
#: <https://github.com/xkbcommon/libxkbcommon/blob/master/include/xkbcommon/xkbcommon-
#: keysyms.h> for a list of key names. The name to use is the part
#: after the XKB_KEY_ prefix. Note that you can only use an XKB key
#: name for keys that are not known as GLFW keys.

#: Finally, you can use raw system key codes to map keys, again only
#: for keys that are not known as GLFW keys. To see the system key
#: code for a key, start kitty with the kitty --debug-input option.
#: Then kitty will output some debug text for every key event. In that
#: text look for ``native_code`` the value of that becomes the key
#: name in the shortcut. For example:

#: .. code-block:: none

#:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'

#: Here, the key name for the A key is 0x61 and you can use it with::

#:     map ctrl+0x61 something

#: to map ctrl+a to something.

#: You can use the special action no_op to unmap a keyboard shortcut
#: that is assigned in the default configuration::

#:     map kitty_mod+space no_op

#: If you would like kitty to completely ignore a key event, not even
#: sending it to the program running in the terminal, map it to
#: discard_event::

#:     map kitty_mod+f1 discard_event

#: You can combine multiple actions to be triggered by a single
#: shortcut, using the syntax below::

#:     map key combine <separator> action1 <separator> action2 <separator> action3 ...

#: For example::

#:     map kitty_mod+e combine : new_window : next_layout

#: this will create a new window and switch to the next available
#: layout

#: You can use multi-key shortcuts using the syntax shown below::

#:     map key1>key2>key3 action

#: For example::

#:     map ctrl+f>2 set_font_size 20

#: The full list of actions that can be mapped to key presses is
#: available here </actions>.

kitty_mod ctrl+shift

#: The value of kitty_mod is used as the modifier for all default
#: shortcuts, you can change it in your kitty.conf to change the
#: modifiers for all the default shortcuts.

clear_all_shortcuts no

#: You can have kitty remove all shortcut definition seen up to this
#: point. Useful, for instance, to remove the default shortcuts.

action_alias

#: E.g. action_alias launch_tab launch --type=tab --cwd=current

#: Define aliases to avoid repeating the same options in multiple
#: mappings. Aliases can be defined for any action. Aliases are
#: expanded recursively. For example, the above alias allows you to
#: create mappings to launch a new tab in the current working
#: directory without duplication::

#:     map f1 launch_tab vim
#:     map f2 launch_tab emacs

#: Similarly, to alias kitten invocation::

#:     action_alias hints kitten hints --hints-offset=0

kitten_alias

#: E.g. kitten_alias hints hints --hints-offset=0

#: Like action_alias above but, specifically for kittens. Generally,
#: prefer to use action_alias. This option is a legacy version,
#: present for backwards compatibility. It causes all invocations of
#: the aliased kitten to be substituted. So the example above will
#: cause all invocations of the hints kitten to have the --hints-
#: offset=0 option applied.

#: Clipboard 

#: Copy to clipboard

map kitty_mod+c copy_to_clipboard

#::  There is also a copy_or_interrupt action that can be optionally
#::  mapped to Ctrl+c. It will copy only if there is a selection and
#::  send an interrupt otherwise. Similarly,
#::  copy_and_clear_or_interrupt will copy and clear the selection or
#::  send an interrupt if there is no selection.

#: Paste from clipboard

map kitty_mod+v paste_from_clipboard

#: Paste from selection

map kitty_mod+s  paste_from_selection
map shift+insert paste_from_selection

#: Pass selection to program

map kitty_mod+o pass_selection_to_program

#::  You can also pass the contents of the current selection to any
#::  program using pass_selection_to_program. By default, the system's
#::  open program is used, but you can specify your own, the selection
#::  will be passed as a command line argument to the program, for
#::  example::

#::      map kitty_mod+o pass_selection_to_program firefox

#::  You can pass the current selection to a terminal program running
#::  in a new kitty window, by using the @selection placeholder::

#::      map kitty_mod+y new_window less @selection

#: 

#: Scrolling 

#: Scroll line up

map kitty_mod+up    scroll_line_up
map kitty_mod+k     scroll_line_up
map opt+cmd+page_up scroll_line_up
map cmd+up          scroll_line_up

#: Scroll line down

map kitty_mod+down    scroll_line_down
map kitty_mod+j       scroll_line_down
map opt+cmd+page_down scroll_line_down
map cmd+down          scroll_line_down

#: Scroll page up

map kitty_mod+page_up scroll_page_up
map cmd+page_up       scroll_page_up

#: Scroll page down

map kitty_mod+page_down scroll_page_down
map cmd+page_down       scroll_page_down

#: Scroll to top

map kitty_mod+home scroll_home
map cmd+home       scroll_home

#: Scroll to bottom

map kitty_mod+end scroll_end
map cmd+end       scroll_end

#: Scroll to previous shell prompt

map kitty_mod+z scroll_to_prompt -1

#::  Use a parameter of zero for scroll_to_prompt to scroll to the
#::  last jumped to or the last clicked position. Requires
#::  https://sw.kovidgoyal.net/kitty/shell-integration/ to work.

#: Scroll to next shell prompt

map kitty_mod+x scroll_to_prompt 1

#: Browse scrollback buffer in pager

map kitty_mod+h show_scrollback

#::  You can pipe the contents of the current screen + history buffer
#::  as STDIN to an arbitrary program using the ``launch`` function.
#::  For example, the following opens the scrollback buffer in less in
#::  an overlay window::

#::      map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R

#::  For more details on piping screen and buffer contents to external
#::  programs, see launch.

#: Browse output of the last shell command in pager

map kitty_mod+g show_last_command_output

#::  You can also define additional shortcuts to get the command
#::  output. For example, to get the first command output on screen::

#::      map f1 show_first_command_output_on_screen

#::  To get the command output that was last accessed by a keyboard
#::  action or mouse action::

#::      map f1 show_last_visited_command_output

#::  You can pipe the output of the last command run in the shell
#::  using the launch function. For example, the following opens the
#::  output in less in an overlay window::

#::      map f1 launch --stdin-source=@last_cmd_output --stdin-add-formatting --type=overlay less +G -R

#::  To get the output of the first command on the screen, use
#::  @first_cmd_output_on_screen. To get the output of the last jumped
#::  to command, use @last_visited_cmd_output.

#::  Requires https://sw.kovidgoyal.net/kitty/shell-integration/ to
#::  work.

#: 

#: Window management 

#: New window

map kitty_mod+enter new_window
map cmd+enter       new_window

#::  You can open a new window running an arbitrary program, for
#::  example::

#::      map kitty_mod+y      launch mutt

#::  You can open a new window with the current working directory set
#::  to the working directory of the current window using::

#::      map ctrl+alt+enter    launch --cwd=current

#::  You can open a new window that is allowed to control kitty via
#::  the kitty remote control facility by prefixing the command line
#::  with @. Any programs running in that window will be allowed to
#::  control kitty. For example::

#::      map ctrl+enter launch --allow-remote-control some_program

#::  You can open a new window next to the currently active window or
#::  as the first window, with::

#::      map ctrl+n launch --location=neighbor some_program
#::      map ctrl+f launch --location=first some_program

#::  For more details, see launch.

#: New OS window

map kitty_mod+n new_os_window
map cmd+n       new_os_window

#::  Works like new_window above, except that it opens a top level OS
#::  kitty window. In particular you can use new_os_window_with_cwd to
#::  open a window with the current working directory.

#: Close window

map kitty_mod+w close_window
map shift+cmd+d close_window

#: Next window

map kitty_mod+] next_window

#: Previous window

map kitty_mod+[ previous_window

#: Move window forward

map kitty_mod+f move_window_forward

#: Move window backward

map kitty_mod+b move_window_backward

#: Move window to top

map kitty_mod+` move_window_to_top

#: Start resizing window

map kitty_mod+r start_resizing_window
map cmd+r       start_resizing_window

#: First window

map kitty_mod+1 first_window
map cmd+1       first_window

#: Second window

map kitty_mod+2 second_window
map cmd+2       second_window

#: Third window

map kitty_mod+3 third_window
map cmd+3       third_window

#: Fourth window

map kitty_mod+4 fourth_window
map cmd+4       fourth_window

#: Fifth window

map kitty_mod+5 fifth_window
map cmd+5       fifth_window

#: Sixth window

map kitty_mod+6 sixth_window
map cmd+6       sixth_window

#: Seventh window

map kitty_mod+7 seventh_window
map cmd+7       seventh_window

#: Eight window

map kitty_mod+8 eighth_window
map cmd+8       eighth_window

#: Ninth window

map kitty_mod+9 ninth_window
map cmd+9       ninth_window

#: Tenth window

map kitty_mod+0 tenth_window

#: Visually select focus window

map kitty_mod+f7 focus_visible_window

#: Visually swap window with another

map kitty_mod+f8 swap_with_window

#: 

#: Tab management 

#: Next tab

map kitty_mod+right next_tab
map shift+cmd+]     next_tab
map ctrl+tab        next_tab

#: Previous tab

map kitty_mod+left previous_tab
map shift+cmd+[    previous_tab
map ctrl+shift+tab previous_tab

#: New tab

map kitty_mod+t new_tab
map cmd+t       new_tab

#: Close tab

map kitty_mod+q close_tab
map cmd+w       close_tab

#: Close OS window

map shift+cmd+w close_os_window

#: Move tab forward

map kitty_mod+. move_tab_forward

#: Move tab backward

map kitty_mod+, move_tab_backward

#: Set tab title

map kitty_mod+alt+t set_tab_title
map shift+cmd+i     set_tab_title


#: You can also create shortcuts to go to specific tabs, with 1 being
#: the first tab, 2 the second tab and -1 being the previously active
#: tab, and any number larger than the last tab being the last tab::

#:     map ctrl+alt+1 goto_tab 1
#:     map ctrl+alt+2 goto_tab 2

#: Just as with new_window above, you can also pass the name of
#: arbitrary commands to run when using new_tab and use
#: new_tab_with_cwd. Finally, if you want the new tab to open next to
#: the current tab rather than at the end of the tabs list, use::

#:     map ctrl+t new_tab !neighbor [optional cmd to run]
#: 

#: Layout management 

#: Next layout

map kitty_mod+l next_layout


#: You can also create shortcuts to switch to specific layouts::

#:     map ctrl+alt+t goto_layout tall
#:     map ctrl+alt+s goto_layout stack

#: Similarly, to switch back to the previous layout::

#:    map ctrl+alt+p last_used_layout

#: There is also a toggle layout function that switches to the named
#: layout or back to the previous layout if in the named layout.
#: Useful to temporarily "zoom" the active window by switching to the
#: stack layout::

#:     map ctrl+alt+z toggle_layout stack
#: 

#: Font sizes 

#: You can change the font size for all top-level kitty OS windows at
#: a time or only the current one.

#: Increase font size

map kitty_mod+equal  change_font_size all +2.0
map kitty_mod+plus   change_font_size all +2.0
map kitty_mod+kp_add change_font_size all +2.0
map cmd+plus         change_font_size all +2.0
map cmd+equal        change_font_size all +2.0
map shift+cmd+equal  change_font_size all +2.0

#: Decrease font size

map kitty_mod+minus       change_font_size all -2.0
map kitty_mod+kp_subtract change_font_size all -2.0
map cmd+minus             change_font_size all -2.0
map shift+cmd+minus       change_font_size all -2.0

#: Reset font size

map kitty_mod+backspace change_font_size all 0
map cmd+0               change_font_size all 0


#: To setup shortcuts for specific font sizes::

#:     map kitty_mod+f6 change_font_size all 10.0

#: To setup shortcuts to change only the current OS window's font
#: size::

#:     map kitty_mod+f6 change_font_size current 10.0
#: 

#: Select and act on visible text 

#: Use the hints kitten to select text and either pass it to an
#: external program or insert it into the terminal or copy it to the
#: clipboard.

#: Open URL

map kitty_mod+e open_url_with_hints

#::  Open a currently visible URL using the keyboard. The program used
#::  to open the URL is specified in open_url_with.

#: Insert selected path

map kitty_mod+p>f kitten hints --type path --program -

#::  Select a path/filename and insert it into the terminal. Useful,
#::  for instance to run git commands on a filename output from a
#::  previous git command.

#: Open selected path

map kitty_mod+p>shift+f kitten hints --type path

#::  Select a path/filename and open it with the default open program.

#: Insert selected line

map kitty_mod+p>l kitten hints --type line --program -

#::  Select a line of text and insert it into the terminal. Use for
#::  the output of things like: ls -1

#: Insert selected word

map kitty_mod+p>w kitten hints --type word --program -

#::  Select words and insert into terminal.

#: Insert selected hash

map kitty_mod+p>h kitten hints --type hash --program -

#::  Select something that looks like a hash and insert it into the
#::  terminal. Useful with git, which uses sha1 hashes to identify
#::  commits

#: Open the selected file at the selected line

map kitty_mod+p>n kitten hints --type linenum

#::  Select something that looks like filename:linenum and open it in
#::  vim at the specified line number.

#: Open the selected hyperlink

map kitty_mod+p>y kitten hints --type hyperlink

#::  Select a hyperlink (i.e. a URL that has been marked as such by
#::  the terminal program, for example, by ls --hyperlink=auto).


#: The hints kitten has many more modes of operation that you can map
#: to different shortcuts. For a full description see kittens/hints.
#: 

#: Miscellaneous 

#: Toggle fullscreen

map kitty_mod+f11 toggle_fullscreen
map ctrl+cmd+f    toggle_fullscreen

#: Toggle maximized

map kitty_mod+f10 toggle_maximized

#: Toggle macOS secure keyboard entry

map opt+cmd+s toggle_macos_secure_keyboard_entry

#: Unicode input

map kitty_mod+u    kitten unicode_input
map ctrl+cmd+space kitten unicode_input

#: Edit config file

map kitty_mod+f2 edit_config_file
map cmd+,        edit_config_file

#: Open the kitty command shell

map kitty_mod+escape kitty_shell window

#::  Open the kitty shell in a new window/tab/overlay/os_window to
#::  control kitty using commands.

#: Increase background opacity

map kitty_mod+a>m set_background_opacity +0.1

#: Decrease background opacity

map kitty_mod+a>l set_background_opacity -0.1

#: Make background fully opaque

map kitty_mod+a>1 set_background_opacity 1

#: Reset background opacity

map kitty_mod+a>d set_background_opacity default

#: Reset the terminal

map kitty_mod+delete clear_terminal reset active
map opt+cmd+r        clear_terminal reset active

#::  You can create shortcuts to clear/reset the terminal. For
#::  example::

#::      # Reset the terminal
#::      map kitty_mod+f9 clear_terminal reset active
#::      # Clear the terminal screen by erasing all contents
#::      map kitty_mod+f10 clear_terminal clear active
#::      # Clear the terminal scrollback by erasing it
#::      map kitty_mod+f11 clear_terminal scrollback active
#::      # Scroll the contents of the screen into the scrollback
#::      map kitty_mod+f12 clear_terminal scroll active

#::  If you want to operate on all windows instead of just the current
#::  one, use all instead of active.

#::  It is also possible to remap Ctrl+L to both scroll the current
#::  screen contents into the scrollback buffer and clear the screen,
#::  instead of just clearing the screen, for example, for ZSH add the
#::  following to ~/.zshrc:

#::  .. code-block:: sh

#::      scroll-and-clear-screen() {
#::          printf '\n%.0s' {1..$LINES}
#::          zle clear-screen
#::      }
#::      zle -N scroll-and-clear-screen
#::      bindkey '^l' scroll-and-clear-screen

#: Clear up to cursor line

map cmd+k clear_terminal to_cursor active

#: Reload kitty.conf

map kitty_mod+f5 load_config_file
map ctrl+cmd+,   load_config_file

#::  Reload kitty.conf, applying any changes since the last time it
#::  was loaded. Note that a handful of settings cannot be dynamically
#::  changed and require a full restart of kitty.  You can also map a
#::  keybinding to load a different config file, for example::

#::      map f5 load_config /path/to/alternative/kitty.conf

#::  Note that all setting from the original kitty.conf are discarded,
#::  in other words the new conf settings *replace* the old ones.

#: Debug kitty configuration

map kitty_mod+f6 debug_config
map opt+cmd+,    debug_config

#::  Show details about exactly what configuration kitty is running
#::  with and its host environment. Useful for debugging issues.

#: Send arbitrary text on key presses

#::  E.g. map ctrl+shift+alt+h send_text all Hello World

#::  You can tell kitty to send arbitrary (UTF-8) encoded text to the
#::  client program when pressing specified shortcut keys. For
#::  example::

#::      map ctrl+alt+a send_text all Special text

#::  This will send "Special text" when you press the ctrl+alt+a key
#::  combination.  The text to be sent is a python string literal so
#::  you can use escapes like \x1b to send control codes or \u21fb to
#::  send unicode characters (or you can just input the unicode
#::  characters directly as UTF-8 text). The first argument to
#::  send_text is the keyboard modes in which to activate the
#::  shortcut. The possible values are normal or application or kitty
#::  or a comma separated combination of them.  The special keyword
#::  all means all modes. The modes normal and application refer to
#::  the DECCKM cursor key mode for terminals, and kitty refers to the
#::  special kitty extended keyboard protocol.

#::  Another example, that outputs a word and then moves the cursor to
#::  the start of the line (same as pressing the Home key)::

#::      map ctrl+alt+a send_text normal Word\x1b[H
#::      map ctrl+alt+a send_text application Word\x1bOH

#: 

#: