Merge branch 'master' of https://github.com/SolidCode/MCAD
This commit is contained in:
commit
2ad18d2a48
157
lego_compatibility.scad
Normal file
157
lego_compatibility.scad
Normal file
|
@ -0,0 +1,157 @@
|
|||
// This file is placed under the public domain
|
||||
|
||||
// from: http://www.thingiverse.com/thing:9512
|
||||
|
||||
|
||||
// EXAMPLES:
|
||||
// standard LEGO 2x1 tile has no pin
|
||||
// block(1,2,1/3,reinforcement=false,flat_top=true);
|
||||
// standard LEGO 2x1 flat has pin
|
||||
// block(1,2,1/3,reinforcement=true);
|
||||
// standard LEGO 2x1 brick has pin
|
||||
// block(1,2,1,reinforcement=true);
|
||||
// standard LEGO 2x1 brick without pin
|
||||
// block(1,2,1,reinforcement=false);
|
||||
// standard LEGO 2x1x5 brick has no pin and has hollow knobs
|
||||
// block(1,2,5,reinforcement=false,hollow_knob=true);
|
||||
|
||||
|
||||
knob_diameter=4.8; //knobs on top of blocks
|
||||
knob_height=2;
|
||||
knob_spacing=8.0;
|
||||
wall_thickness=1.45;
|
||||
roof_thickness=1.05;
|
||||
block_height=9.5;
|
||||
pin_diameter=3; //pin for bottom blocks with width or length of 1
|
||||
post_diameter=6.5;
|
||||
reinforcing_width=1.5;
|
||||
axle_spline_width=2.0;
|
||||
axle_diameter=5;
|
||||
cylinder_precision=0.5;
|
||||
|
||||
/* EXAMPLES:
|
||||
|
||||
block(2,1,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=true);
|
||||
|
||||
translate([50,-10,0])
|
||||
block(1,2,1/3,axle_hole=false,circular_hole=true,reinforcement=false,hollow_knob=true,flat_top=true);
|
||||
|
||||
translate([10,0,0])
|
||||
block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=true);
|
||||
translate([30,0,0])
|
||||
block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=false,flat_top=false);
|
||||
translate([50,0,0])
|
||||
block(2,2,1/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=false);
|
||||
translate([0,20,0])
|
||||
block(3,2,2/3,axle_hole=false,circular_hole=true,reinforcement=true,hollow_knob=true,flat_top=false);
|
||||
translate([20,20,0])
|
||||
block(3,2,1,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=false,flat_top=false);
|
||||
translate([40,20,0])
|
||||
block(3,2,1/3,axle_hole=false,circular_hole=false,reinforcement=false,hollow_knob=false,flat_top=false);
|
||||
translate([0,-10,0])
|
||||
block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=false,flat_top=false);
|
||||
translate([0,-20,0])
|
||||
block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=true,flat_top=false);
|
||||
translate([0,-30,0])
|
||||
block(1,5,1/3,axle_hole=true,circular_hole=false,reinforcement=true,hollow_knob=true,flat_top=true);
|
||||
//*/
|
||||
|
||||
module block(width,length,height,axle_hole=false,reinforcement=false, hollow_knob=false, flat_top=false, circular_hole=false, solid_bottom=true, center=false) {
|
||||
overall_length=(length-1)*knob_spacing+knob_diameter+wall_thickness*2;
|
||||
overall_width=(width-1)*knob_spacing+knob_diameter+wall_thickness*2;
|
||||
center= center==true ? 1 : 0;
|
||||
translate(center*[-overall_length/2, -overall_width/2, 0])
|
||||
union() {
|
||||
difference() {
|
||||
union() {
|
||||
// body:
|
||||
cube([overall_length,overall_width,height*block_height]);
|
||||
// knobs:
|
||||
if (flat_top != true)
|
||||
translate([knob_diameter/2+wall_thickness,knob_diameter/2+wall_thickness,0])
|
||||
for (ycount=[0:width-1])
|
||||
for (xcount=[0:length-1]) {
|
||||
translate([xcount*knob_spacing,ycount*knob_spacing,0])
|
||||
difference() {
|
||||
cylinder(r=knob_diameter/2,h=block_height*height+knob_height,$fs=cylinder_precision);
|
||||
if (hollow_knob==true)
|
||||
translate([0,0,-roof_thickness])
|
||||
cylinder(r=pin_diameter/2,h=block_height*height+knob_height+2*roof_thickness,$fs=cylinder_precision);
|
||||
}
|
||||
}
|
||||
}
|
||||
// hollow bottom:
|
||||
if (solid_bottom == false)
|
||||
translate([wall_thickness,wall_thickness,-roof_thickness]) cube([overall_length-wall_thickness*2,overall_width-wall_thickness*2,block_height*height]);
|
||||
// flat_top -> groove around bottom
|
||||
if (flat_top == true) {
|
||||
translate([-wall_thickness/2,-wall_thickness*2/3,-wall_thickness/2])
|
||||
cube([overall_length+wall_thickness,wall_thickness,wall_thickness]);
|
||||
translate([-wall_thickness/2,overall_width-wall_thickness/3,-wall_thickness/2])
|
||||
cube([overall_length+wall_thickness,wall_thickness,wall_thickness]);
|
||||
|
||||
translate([-wall_thickness*2/3,-wall_thickness/2,-wall_thickness/2])
|
||||
cube([wall_thickness,overall_width+wall_thickness,wall_thickness]);
|
||||
translate([overall_length-wall_thickness/3,0,-wall_thickness/2])
|
||||
cube([wall_thickness,overall_width+wall_thickness,wall_thickness]);
|
||||
}
|
||||
if (axle_hole==true)
|
||||
if (width>1 && length>1) for (ycount=[1:width-1])
|
||||
for (xcount=[1:length-1])
|
||||
translate([xcount*knob_spacing,ycount*knob_spacing,roof_thickness]) axle(height);
|
||||
if (circular_hole==true)
|
||||
if (width>1 && length>1) for (ycount=[1:width-1])
|
||||
for (xcount=[1:length-1])
|
||||
translate([xcount*knob_spacing,ycount*knob_spacing,roof_thickness])
|
||||
cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness/4,$fs=cylinder_precision);
|
||||
}
|
||||
|
||||
if (reinforcement==true && width>1 && length>1)
|
||||
difference() {
|
||||
for (ycount=[1:width-1])
|
||||
for (xcount=[1:length-1])
|
||||
translate([xcount*knob_spacing,ycount*knob_spacing,0]) reinforcement(height);
|
||||
for (ycount=[1:width-1])
|
||||
for (xcount=[1:length-1])
|
||||
translate([xcount*knob_spacing,ycount*knob_spacing,-roof_thickness/2]) cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness, $fs=cylinder_precision);
|
||||
}
|
||||
// posts:
|
||||
if (solid_bottom == false)
|
||||
if (width>1 && length>1) for (ycount=[1:width-1])
|
||||
for (xcount=[1:length-1])
|
||||
translate([xcount*knob_spacing,ycount*knob_spacing,0]) post(height);
|
||||
|
||||
if (reinforcement == true && width==1 && length!=1)
|
||||
for (xcount=[1:length-1])
|
||||
translate([xcount*knob_spacing,overall_width/2,0]) cylinder(r=pin_diameter/2,h=block_height*height,$fs=cylinder_precision);
|
||||
|
||||
if (reinforcement == true && length==1 && width!=1)
|
||||
for (ycount=[1:width-1])
|
||||
translate([overall_length/2,ycount*knob_spacing,0]) cylinder(r=pin_diameter/2,h=block_height*height,$fs=cylinder_precision);
|
||||
}
|
||||
}
|
||||
|
||||
module post(height) {
|
||||
difference() {
|
||||
cylinder(r=post_diameter/2, h=height*block_height-roof_thickness/2,$fs=cylinder_precision);
|
||||
translate([0,0,-roof_thickness/2])
|
||||
cylinder(r=knob_diameter/2, h=height*block_height+roof_thickness/4,$fs=cylinder_precision);
|
||||
}
|
||||
}
|
||||
|
||||
module reinforcement(height) {
|
||||
union() {
|
||||
translate([0,0,height*block_height/2]) union() {
|
||||
cube([reinforcing_width,knob_spacing+knob_diameter+wall_thickness/2,height*block_height],center=true);
|
||||
rotate(v=[0,0,1],a=90) cube([reinforcing_width,knob_spacing+knob_diameter+wall_thickness/2,height*block_height], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module axle(height) {
|
||||
translate([0,0,height*block_height/2]) union() {
|
||||
cube([axle_diameter,axle_spline_width,height*block_height],center=true);
|
||||
cube([axle_spline_width,axle_diameter,height*block_height],center=true);
|
||||
}
|
||||
}
|
||||
|
29
multiply.scad
Normal file
29
multiply.scad
Normal file
|
@ -0,0 +1,29 @@
|
|||
/*
|
||||
* Multiplication along certain curves
|
||||
*
|
||||
* Copyright by Elmo Mäntynen, 2012.
|
||||
* Licenced under LGPL2 or later
|
||||
*/
|
||||
|
||||
include <units.scad>
|
||||
|
||||
use <utilities.scad>
|
||||
|
||||
// TODO check that the axis parameter works as intended
|
||||
// Duplicate everything $no of times around an $axis, for $angle/360 rounds
|
||||
module spin(no, angle=360, axis=Z){
|
||||
for (i = [1:no]){
|
||||
rotate(normalized_axis(axis)*angle*no/i) union(){
|
||||
for (i = [0 : $children-1]) child(i);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//Doesn't work currently
|
||||
module duplicate(axis=Z) spin(no=2, axis=axis) child(0);
|
||||
|
||||
module linear_multiply(no, separation, axis=Z){
|
||||
for (i = [0:no-1]){
|
||||
translate(i*separation*axis) child(0);
|
||||
}
|
||||
}
|
|
@ -76,6 +76,13 @@ module dodecagon(radius)
|
|||
reg_polygon(12,radius);
|
||||
}
|
||||
|
||||
module ring(inside_diameter, thickness){
|
||||
difference(){
|
||||
circle(r=(inside_diameter+thickness*2)/2);
|
||||
circle(r=inside_diameter/2);
|
||||
}
|
||||
}
|
||||
|
||||
module ellipse(width, height) {
|
||||
scale([1, height/width, 1]) circle(r=width/2);
|
||||
}
|
||||
|
@ -93,17 +100,17 @@ module egg_outline(width, length){
|
|||
|
||||
//3D regular shapes
|
||||
|
||||
module cone(height, radius, center = false)
|
||||
module cone(height, radius, center = false)
|
||||
{
|
||||
cylinder(height, radius, 0, center);
|
||||
}
|
||||
|
||||
module oval_prism(height, rx, ry, center = false)
|
||||
module oval_prism(height, rx, ry, center = false)
|
||||
{
|
||||
scale([1, rx/ry, 1]) cylinder(h=height, r=ry, center=center);
|
||||
}
|
||||
|
||||
module oval_tube(height, rx, ry, wall, center = false)
|
||||
module oval_tube(height, rx, ry, wall, center = false)
|
||||
{
|
||||
difference() {
|
||||
scale([1, ry/rx, 1]) cylinder(h=height, r=rx, center=center);
|
||||
|
@ -111,7 +118,7 @@ module oval_tube(height, rx, ry, wall, center = false)
|
|||
}
|
||||
}
|
||||
|
||||
module cylinder_tube(height, radius, wall, center = false)
|
||||
module cylinder_tube(height, radius, wall, center = false)
|
||||
{
|
||||
tubify(radius,wall)
|
||||
cylinder(h=height, r=radius, center=center);
|
||||
|
@ -144,10 +151,10 @@ module pentagon_prism(height,radius)
|
|||
|
||||
module pentagon_tube(height,radius,wall)
|
||||
{
|
||||
tubify(radius,wall) pentagon_prism(height,radius);
|
||||
tubify(radius,wall) pentagon_prism(height,radius);
|
||||
}
|
||||
|
||||
module hexagon_prism(height,radius)
|
||||
module hexagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) hexagon(radius);
|
||||
}
|
||||
|
@ -157,7 +164,7 @@ module hexagon_tube(height,radius,wall)
|
|||
tubify(radius,wall) hexagon_prism(height,radius);
|
||||
}
|
||||
|
||||
module heptagon_prism(height,radius)
|
||||
module heptagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) heptagon(radius);
|
||||
}
|
||||
|
@ -167,9 +174,9 @@ module heptagon_tube(height,radius,wall)
|
|||
tubify(radius,wall) heptagon_prism(height,radius);
|
||||
}
|
||||
|
||||
module octagon_prism(height,radius)
|
||||
module octagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) octagon(radius);
|
||||
linear_extrude(height=height) octagon(radius);
|
||||
}
|
||||
|
||||
module octagon_tube(height,radius,wall)
|
||||
|
@ -179,28 +186,28 @@ module octagon_tube(height,radius,wall)
|
|||
|
||||
module nonagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) nonagon(radius);
|
||||
linear_extrude(height=height) nonagon(radius);
|
||||
}
|
||||
|
||||
module decagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) decagon(radius);
|
||||
linear_extrude(height=height) decagon(radius);
|
||||
}
|
||||
|
||||
module hendecagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) hendecagon(radius);
|
||||
linear_extrude(height=height) hendecagon(radius);
|
||||
}
|
||||
|
||||
module dodecagon_prism(height,radius)
|
||||
{
|
||||
linear_extrude(height=height) dodecagon(radius);
|
||||
linear_extrude(height=height) dodecagon(radius);
|
||||
}
|
||||
|
||||
module torus(outerRadius, innerRadius)
|
||||
{
|
||||
r=(outerRadius-innerRadius)/2;
|
||||
rotate_extrude() translate([innerRadius+r,0,0]) circle(r);
|
||||
rotate_extrude() translate([innerRadius+r,0,0]) circle(r);
|
||||
}
|
||||
|
||||
module torus2(r1, r2)
|
||||
|
|
|
@ -10,8 +10,13 @@ mm = 1;
|
|||
cm = 10 * mm;
|
||||
dm = 100 * mm;
|
||||
m = 1000 * mm;
|
||||
|
||||
inch = 25.4 * mm;
|
||||
|
||||
X = [1, 0, 0];
|
||||
Y = [0, 1, 0];
|
||||
Z = [0, 0, 1];
|
||||
|
||||
M3 = 3*mm;
|
||||
M4 = 4*mm;
|
||||
M5 = 5*mm;
|
||||
|
|
|
@ -15,7 +15,9 @@ function length2(a) = sqrt( a[0]*a[0] + a[1]*a[1] );
|
|||
|
||||
function normalized(a) = a / (max(distance([0,0,0], a), 0.00001));
|
||||
|
||||
|
||||
function normalized_axis(a) = a == "x" ? [1, 0, 0]:
|
||||
a == "y" ? [0, 1, 0]:
|
||||
a == "z" ? [0, 0, 1]: normalized(a);
|
||||
|
||||
function angleOfNormalizedVector(n) = [0, -atan2(n[2], length2([n[0], n[1]])), atan2(n[1], n[0]) ];
|
||||
|
||||
|
@ -23,16 +25,6 @@ function angle(v) = angleOfNormalizedVector(normalized(v));
|
|||
|
||||
function angleBetweenTwoPoints(a, b) = angle(normalized(b-a));
|
||||
|
||||
// TODO check that the axis parameter works as intended
|
||||
// Duplicate everything $no of times around an $axis, for $angle/360 rounds
|
||||
module spin(no, angle=360, axis=[0, 0, 1]){
|
||||
for (i = [0:no]){
|
||||
rotate(normalized(axis)*angle*i/no) union(){
|
||||
for (i = [0 : $children-1]) child(i);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
CENTER = 0;
|
||||
LEFT = -0.5;
|
||||
|
|
Loading…
Reference in a new issue