.gitmodules

@@ -1,6 +1,3 @@
 [submodule "lib/MCAD"]
 	path = lib/MCAD
 	url = https://gitea.bgenc.net/kaan/MCAD-Library.git
-[submodule "lib/gridfinity-rebuilt-openscad"]
-	path = lib/gridfinity-rebuilt-openscad
-	url = https://github.com/kennetek/gridfinity-rebuilt-openscad.git

Gridfinity/Rulers/ruler.scad

@@ -1,94 +0,0 @@
-include <../../lib/gridfinity-rebuilt-openscad/gridfinity-rebuilt-utility.scad>
-
-// There are 2 variants of the rulers, 2 "small" ones and 2 "large" ones.
-
-// bin height. See bin height information and "gridz_define" below.  
-gridz = 2;
-// determine what the variable "gridz" applies to based on your use case
-gridz_define = 0; // [0:gridz is the height of bins in units of 7mm increments - Zack's method,1:gridz is the internal height in millimeters, 2:gridz is the overall external height of the bin in millimeters]
-
-thicknessSmall = 1.25;
-thicknessLarge = 1.25;
-widthSmall = 21.00;
-widthLarge = 28.00;
-depth = 7 * gridz - 5;
-// The positioning and gaps between the rulers
-gap = 8.4;
-offset = -10;
-// slide the rules slightly along the X axis to make them easier to grab
-xSlide = 3;
-xOffset = -14;
-// Put the rulers at a slight angle so they are easier to grab
-rot = -18;
-
-
-module __hide_parameters() {};
-
-$fn = $preview ? 12 : 24;
-/* [General Settings] */
-// number of bases along x-axis
-gridx = 1;  
-// number of bases along y-axis   
-gridy = 1;  
-
-/* [Compartments] */
-// number of X Divisions (set to zero to have solid bin)
-divx = 0;
-// number of y Divisions (set to zero to have solid bin)
-divy = 0;
-
-/* [Height] */
-// overrides internal block height of bin (for solid containers). Leave zero for default height. Units: mm
-height_internal = 0; 
-// snap gridz height to nearest 7mm increment
-enable_zsnap = false;
-
-/* [Features] */
-// the type of tabs
-style_tab = 5; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
-// how should the top lip act
-style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]
-// scoop weight percentage. 0 disables scoop, 1 is regular scoop. Any real number will scale the scoop. 
-scoop = 1; //[0:0.1:1]
-// only cut magnet/screw holes at the corners of the bin to save uneccesary print time
-only_corners = false;
-
-/* [Base] */
-style_hole = 3; // [0:no holes, 1:magnet holes only, 2: magnet and screw holes - no printable slit, 3: magnet and screw holes - printable slit, 4: Gridfinity Refined hole - no glue needed]
-// number of divisions per 1 unit of base along the X axis. (default 1, only use integers. 0 means automatically guess the right division)
-div_base_x = 0;
-// number of divisions per 1 unit of base along the Y axis. (default 1, only use integers. 0 means automatically guess the right division)
-div_base_y = 0; 
-
-
-difference() {
-  color("tomato") {
-  gridfinityInit(gridx, gridy, height(gridz, gridz_define, style_lip, enable_zsnap), height_internal) {
-
-      if (divx > 0 && divy > 0)
-      cutEqual(n_divx = divx, n_divy = divy, style_tab = style_tab, scoop_weight = scoop);
-  }
-  gridfinityBase(gridx, gridy, l_grid, div_base_x, div_base_y, style_hole, only_corners=only_corners);
-
-  }
-
-  for (i = [0:1:3]) {
-    thickness = i < 2 ? thicknessSmall : thicknessLarge;
-    width = i < 2 ? widthSmall : widthLarge;
-    extraXOffset = i < 2 ? 0 : -7;
-    taperDepth = 5;
-    taperRatio = 1.2;
-    taperWidth = width * taperRatio;
-
-    translate([xOffset + extraXOffset + xSlide * i, gap * i + offset, 5.4])
-      rotate([0, 0, rot])
-      union() {
-        translate([taperWidth / 2.5, thickness / 2, depth - taperDepth])
-          linear_extrude(height = taperDepth, scale = [taperRatio, 3])
-          // move square a bit to get a taper equal on both sides
-          translate([-taperWidth / 2.5, -thickness / 2, 0])
-          square(size=[width, thickness]);
-        cube([width, thickness, depth]);
-      }
-  }
-}

lib/gridfinity-rebuilt-openscad

@@ -1 +0,0 @@
-Subproject commit c95938da943ec4789189be7b3c6e8543d2cc36dd